“RAJLAXMI” Flexible Shaft Grinder is a combination of a Flexible Shaft consisting of a rotating wire rope or coil (known as Inner core) which is flexible but has some torsion stiffness, and an Induction Electric High Speed Motor mounted on a swivelling stand. Flexible shaft is constructed with a number of superimposed, tightly wound, helical coils spring wrapped around a centre wire due to which it can be bent, without fracture, to a much smaller radius than a solid shaft of the same outside diameter. When the motor is switched on considerable power is transmitted with negligible friction to the end of the flexible shaft where a grinding, cutting or buffing wheel is attached.
The biggest benefit of Flexible shaft grinder is its possibility to operate in restricted areas at constant speed. Thus Rajlaxmi make Flexible shaft grinding is the most appropriate method to grind or polish heavy unmovable or heavy to handle jobs there by giving freedom to the operator to grind the job without handling it. “RAJLAXMI” make Flexible Shaft Grinders manufactured at Rolex Enterprise Rajkot, Gujarat, INDIA. These grinders are continuous duty rating, easy to operate, robust constructed, vibration free and low maintenance as a result of which high productivity is achieved at lowest consumption of power.
Product Details:
Minimum Order Quantity | 1 Piece |
Model Number/Name | RFG-01 |
Material | CAST IRON |
Design Type | RAJLAXMI |
Voltage | 440 V |
Country of Origin | Made in India |
Power Consumption | 0.75 KW |
Color | GREEN |
Weight | 22 KG |
Warranty | 1 year |
No Load Speed | 2800 |
Is It Spindle Lock | Non Spindle Lock |
Type | Single Speed |
Brand | RAJLAXMI |
Model Name/Number | RFG-01 |
Amperage | 0.75 KW |
Phase | 3 |
Usage/Application | GRINDING,POLISHING |
Finishing | SMOOTH |
MODEL NO. | H.P | K.W | R.P.M | PHASE | SHAFT
LENGTH | VOLTS | APPROX WT.
KG. |
---|---|---|---|---|---|---|---|
RFG-1 | 1 | 0.75 | 2800 | 3 | 2 mts | 440 | 22 |
RFG-2 | 2 | 1.50 | 2800 | 3 | 3 mts | 440 | 31 |
RFG-3 | 1 | 0.75 | 2800 | 1 | 2 mts | 230 | 22 |
RFG-4 | 2 | 1.50 | 2800 | 1 | 3 mts | 230 | 31 (Shaft – 6 kg) |
All dimensions are in mm. 3 phase model = 440 Volts 1 phase model = 230 Volts |
Product Details:
Minimum Order Quantity | 1 Piece |
Phase | 3 PHASE |
Country of Origin | Made in India |
Usage/Application | GRINDING PURPOSE |
Model Name/Number | RFG-01 |
Warranty | 1 year |
No Load Speed | 2800 RPM |
VOLTAGE | 440 VOLT |
HP | 1 HP |
RPM | 2800 RPM |
HZ | 50HZ |
MODEL NO. | H.P | K.W | R.P.M | PHASE | SHAFT
LENGTH | VOLTS | APPROX WT.
KG. |
---|---|---|---|---|---|---|---|
RFG-1 | 1 | 0.75 | 2800 | 3 | 2 mts | 440 | 22 |
RFG-2 | 2 | 1.50 | 2800 | 3 | 3 mts | 440 | 31 |
RFG-3 | 1 | 0.75 | 2800 | 1 | 2 mts | 230 | 22 |
RFG-4 | 2 | 1.50 | 2800 | 1 | 3 mts | 230 | 31 (Shaft – 6 kg) |
All dimensions are in mm. 3 phase model = 440 Volts 1 phase model = 230 Volts |
Product Details:
Minimum Order Quantity | 1 Piece |
Warranty | 1 year |
Model Name/Number | RFG-01 |
Color | GREEN |
Phase | 3 |
Country of Origin | Made in India |
Type | Single Speed |
Weight | 22 KG |
Voltage | 440 V |
Power Consumption | 0.75 KW |
Material | HEAVY DUTY |
Usage/Application | GRINDING |
No Load Speed | 2800 RPM |
Brand | RAJLAXMI |
Amperage | 0.75 KW |
Model | RFG-01 |
“RAJLAXMI” Flexible Shaft Grinder is a combination of a Flexible Shaft consisting of a rotating wire rope or coil (known as Inner core) which is flexible but has some torsion stiffness, and an Induction Electric High Speed Motor mounted on a swivelling stand. Flexible shaft is constructed with a number of superimposed, tightly wound, helical coils spring wrapped around a centre wire due to which it can be bent, without fracture, to a much smaller radius than a solid shaft of the same outside diameter. When the motor is switched on considerable power is transmitted with negligible friction to the end of the flexible shaft where a grinding, cutting or buffing wheel is attached.
The biggest benefit of Flexible shaft grinder is its possibility to operate in restricted areas at constant speed. Thus Rajlaxmi make Flexible shaft grinding is the most appropriate method to grind or polish heavy unmovable or heavy to handle jobs there by giving freedom to the operator to grind the job without handling it. “RAJLAXMI” make Flexible Shaft Grinders manufactured at Rolex Enterprise Rajkot, Gujarat, INDIA. These grinders are continuous duty rating, easy to operate, robust constructed, vibration free and low maintenance as a result of which high productivity is achieved at lowest consumption of power.
SPECIFICATIONSMODEL NO. | H.P | K.W | R.P.M | PHASE | SHAFT
LENGTH | VOLTS | APPROX WT.
KG. |
---|---|---|---|---|---|---|---|
RFG-1 | 1 | 0.75 | 2800 | 3 | 2 mts | 440 | 22 |
RFG-2 | 2 | 1.50 | 2800 | 3 | 3 mts | 440 | 31 |
RFG-3 | 1 | 0.75 | 2800 | 1 | 2 mts | 230 | 22 |
RFG-4 | 2 | 1.50 | 2800 | 1 | 3 mts | 230 | 31 (Shaft – 6 kg) |
All dimensions are in mm. 3 phase model = 440 Volts 1 phase model = 230 Volts |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Warranty | 1 year |
Usage/Application | Buffing,Polishing,Broaching,Deburring,Honing and Lapping Machines |
Brand | RAJLAXMI |
Color | GREEN |
Power Type | Electric |
Type | Single Speed |
Motor Power | 1 HP |
Speed | 2800 RPM |
Power Consumption | 0.75 KW |
Country of Origin | Made in India |
Weight | 22 KG APPROX |
Power | 1 HP |
No Load Speed | 2800 |
Phase | 3 |
Frequency | 50 HZ |
Model Name/Number | RFG-01 |
Voltage | 440 V |
Material | HEAVY DUTY |
“RAJLAXMI” Flexible Shaft Grinder is a combination of a Flexible Shaft consisting of a rotating wire rope or coil (known as Inner core) which is flexible but has some torsion stiffness, and an Induction Electric High Speed Motor mounted on a swivelling stand. Flexible shaft is constructed with a number of superimposed, tightly wound, helical coils spring wrapped around a centre wire due to which it can be bent, without fracture, to a much smaller radius than a solid shaft of the same outside diameter. When the motor is switched on considerable power is transmitted with negligible friction to the end of the flexible shaft where a grinding, cutting or buffing wheel is attached.
The biggest benefit of Flexible shaft grinder is its possibility to operate in restricted areas at constant speed. Thus Rajlaxmi make Flexible shaft grinding is the most appropriate method to grind or polish heavy unmovable or heavy to handle jobs there by giving freedom to the operator to grind the job without handling it. “RAJLAXMI” make Flexible Shaft Grinders manufactured at Rolex Enterprise Rajkot, Gujarat, INDIA. These grinders are continuous duty rating, easy to operate, robust constructed, vibration free and low maintenance as a result of which high productivity is achieved at lowest consumption of power.
SPECIFICATIONSMODEL NO. | H.P | K.W | R.P.M | PHASE | SHAFT
LENGTH | VOLTS | APPROX WT.
KG. |
---|---|---|---|---|---|---|---|
RFG-1 | 1 | 0.75 | 2800 | 3 | 2 mts | 440 | 22 |
RFG-2 | 2 | 1.50 | 2800 | 3 | 3 mts | 440 | 31 |
RFG-3 | 1 | 0.75 | 2800 | 1 | 2 mts | 230 | 22 |
RFG-4 | 2 | 1.50 | 2800 | 1 | 3 mts | 230 | 31 (Shaft – 6 kg) |
All dimensions are in mm. 3 phase model = 440 Volts 1 phase model = 230 Volts |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
No Load Speed | 2800 RPM |
Power Type | Electric |
Type | Single Speed |
Speed | 2800 RPM |
Country of Origin | Made in India |
Power | 1 HP |
Power Consumption | 0.75 KW |
Model | RFG-01 |
Model Name/Number | RFG-01 |
Usage/Application | GRINDING |
Color | GREEN |
Warranty | 1 year |
Phase | 3 |
Voltage | 440 V |
Material | HEAVY DUTY |
Brand | RAJLAXMI |
Frequency | 50 HZ |
I Deal In | New Only |
“RAJLAXMI” Flexible Shaft Grinder is a combination of a Flexible Shaft consisting of a rotating wire rope or coil (known as Inner core) which is flexible but has some torsion stiffness, and an Induction Electric High Speed Motor mounted on a swivelling stand. Flexible shaft is constructed with a number of superimposed, tightly wound, helical coils spring wrapped around a centre wire due to which it can be bent, without fracture, to a much smaller radius than a solid shaft of the same outside diameter. When the motor is switched on considerable power is transmitted with negligible friction to the end of the flexible shaft where a grinding, cutting or buffing wheel is attached.
The biggest benefit of Flexible shaft grinder is its possibility to operate in restricted areas at constant speed. Thus Rajlaxmi make Flexible shaft grinding is the most appropriate method to grind or polish heavy unmovable or heavy to handle jobs there by giving freedom to the operator to grind the job without handling it. “RAJLAXMI” make Flexible Shaft Grinders manufactured at Rolex Enterprise Rajkot, Gujarat, INDIA. These grinders are continuous duty rating, easy to operate, robust constructed, vibration free and low maintenance as a result of which high productivity is achieved at lowest consumption of power.
SPECIFICATIONSMODEL NO. | H.P | K.W | R.P.M | PHASE | SHAFT
LENGTH | VOLTS | APPROX WT.
KG. |
---|---|---|---|---|---|---|---|
RFG-1 | 1 | 0.75 | 2800 | 3 | 2 mts | 440 | 22 |
RFG-2 | 2 | 1.50 | 2800 | 3 | 3 mts | 440 | 31 |
RFG-3 | 1 | 0.75 | 2800 | 1 | 2 mts | 230 | 22 |
RFG-4 | 2 | 1.50 | 2800 | 1 | 3 mts | 230 | 31 (Shaft – 6 kg) |
All dimensions are in mm. 3 phase model = 440 Volts 1 phase model = 230 Volts |
Product Details:
Minimum Order Quantity | 1 Piece |
Power Consumption | 0.75 K.W |
Amperage | 0.75 KW |
Brand | Rajlaxmi |
Warranty | 1 year |
Country of Origin | Made in India |
Color | GREEN |
No Load Speed | 2800 RPM |
Model Name/Number | RFG-01 |
Phase | 3 |
Type | Single Speed |
Model | RFG-01 |
Voltage | 440 VOLT |
Material | HEAVY DUTY |
Weight | 22 KG |
The biggest benefit of Flexible shaft grinder is its possibility to operate in restricted areas at constant speed. Thus Rajlaxmi make Flexible shaft grinding is the most appropriate method to grind or polish heavy unmovable or heavy to handle jobs there by giving freedom to the operator to grind the job without handling it. “RAJLAXMI” make Flexible Shaft Grinders manufactured at Rolex Enterprise Rajkot, Gujarat, INDIA. These grinders are continuous duty rating, easy to operate, robust constructed, vibration free and low maintenance as a result of which high productivity is achieved at lowest consumption of power.
Features:
MODEL NO. | H.P | K.W | R.P.M | PHASE | SHAFT
LENGTH | VOLTS | APPROX WT.
KG. |
---|---|---|---|---|---|---|---|
RFG-1 | 1 | 0.75 | 2800 | 3 | 2 mts | 440 | 22 |
RFG-2 | 2 | 1.50 | 2800 | 3 | 3 mts | 440 | 31 |
RFG-3 | 1 | 0.75 | 2800 | 1 | 2 mts | 230 | 22 |
RFG-4 | 2 | 1.50 | 2800 | 1 | 3 mts | 230 | 31 (Shaft – 6 kg) |
All dimensions are in mm. 3 phase model = 440 Volts 1 phase model = 230 Volts |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | BUFFING AND GRINDING |
Power | 1 H.P. FLEXIBLE GRINDER |
Material | HEAVY DUTY |
Automatic Grade | Manual |
Weight | 20 KG |
Brand | RAJLAXMI |
Machine Capacity | 1 H.P. |
Motor | 1 HP |
Brush Speed | 2800 RPM |
Frequency Range | 50 HZ |
Country of Origin | Made in India |
MODEL NO. | H.P | K.W | R.P.M | PHASE | SPINDLE
LENGTH | SPINDLE
DIAMETER | WHEEL SIZE | APPROX WT. KG. |
---|---|---|---|---|---|---|---|---|
RGP-01 | 0.5 | 0.37 | 2800 | 3 | 150 | 28 | 150 x 20 x 31.75 | 19 |
RGP-02 | 0.75 | 0.55 | 2800 | 3 | 230 | 35 | 200 x 25 x 31.75 | 30 |
RGP-03 | 1 | 0.75 | 2800 | 3 | 230 | 35 | 250 x 25 x 31.75 | 36 |
RGP-04 | 2 | 1.50 | 2800 | 3 | 230 | 38 | 300 X 40 X 38.10 | 55 |
RGP-05 | 0.25 | 0.18 | 2800 | 1 | 100 | 22 | 100 x 20 x 19.05 | 12 |
RGP-06 | 0.5 | 0.37 | 2800 | 1 | 150 | 28 | 150 x 20 x 31.75 | 19 |
RGP-07 | 0.75 | 0.55 | 2800 | 1 | 230 | 35 | 200 x 25 x 31.75 | 30 |
RGP-08 | 1 | 0.75 | 2800 | 1 | 230 | 35 | 250 x 25 x 31.75 | 43 |
RGP-09 | 2 | 1.50 | 2800 | 1 | 230 | 38 | 300 X 40 X 38.10 | 65 |
All dimensions are in mm 3 phase model = 440 Volts 1 phase model = 230 Volts |
4.5/5
Reviewed by 108 Users
Most Relevant Reviews